Protocol specification v3

From Bitmessage Wiki
Jump to navigation Jump to search


This is a DRAFT for the protocol version 3. It describes the changes in protocol version 3 versus version 2. Things which are unchanged from version 2 are not described in detail. So you should use the version 2 protocol specification as a reference for all formats which are not mentioned in this description.

New features in version 3

Here are the new features of the version 3 of Bitmessage protocol in keywords:

  • object type is now coded inside the message
  • objects may have a variable time to live
  • The POW is more difficult but can be easier if you lower the time to live
  • The protocol is tolerant for further message extension
  • The protocol is tolerant for further object extension
  • A lower maximum object size

Common structures

Variable length integer

The shortest possible encoding MUST be used. In version 2 the decimal value 10 could be encoded as 0x0A, 0xFD000A, 0xFE0000000A, or 0xFF000000000000000A. In version 3 only the shortest representation, 0x0A, is allowed. The 9-byte form is no longer useful and SHOULD NOT be used.

Message types

Most message types are unchanged from version 2 to version 3. Only the four "objecttype" messages are not valid any more. They are summarized into one single message.


The version message is identical to version 2 version message.


The verack message is identical to version 2 verack message.


The addr message is identical to version 2 addr message.


The inv message is identical to version 2 inv message.


The getdata message is identical to version 2 getdata message.

Unsupported messages

If a node receives an unknown message it must silently ignore it. This is for further extensions of the protocol with other messages. Nodes that don't understand such a new message type shall be able to work correct with the message types they understand.

Maybe some version 2 nodes did already implement it that way, but in version 3 it is part of the protocol specification, that a node must silently ignore unsupported messages.

Object type

The four former object types "getpubkey", "pubkey", "msg" and "broadcast" are summarized into a single Message type "object". The four Messages as they did exist in version 2 protocol are not valid any more.

Objects are shared throughout a stream. A client should advertise objects until their end of life time is reached. To be a valid object, the Proof Of Work has to be done.

Field Size Description Data type Comments
8 POW nonce uint64_t

Random nonce used for the Proof Of Work

8 time uint64_t

The "end of life" time of this object (be aware, in version 2 of the protocol this was the generation time). Objects shall be broadcast until its end of life time has been reached. The node shall store the inventory vector of that object for at least another hour to avoid reloading it from another node with a small time delay. The maximum value for the "time to life" of an object is 28 days. so the "end of life time" is 28 days in the future at maximum.

4 object type uint32_t

This field specifies the content of the object. Valid values are (at the moment) 0-"getpubkey", 1-"pubkey", 2-"msg", 3-"broadcast". all other values are reserved. Nodes shall transport objects with unknown types, too. This will make further protocol changes more easy.

? payload uchar[]

This field varies depending on the object type. For a detailed description of their content refer to version 2 object types

Proof of Work

Generally the POW is done exactly like in version 2

The "target" (the difficulty of the POW) is defined a little bit lower (more difficult) in version 3. This is, because practice did show, it is to easy to flood the network with data. In addition to that it is possible in version 3 to lower the time to live of a message (for example when doing a live chat) and getting an easier POW for that.

Setting the live time e.g. to 360 seconds (6 Minutes), which is totally sufficient for a live chat, the POW will be 10 times easier than in version 2.

The "time to live" is the difference between the current time and the "end of life" time. For POW check and generation the "time to live" value is considered to be at least 300 seconds, even if the object has to live less than 300 seconds.

   payload = EndOfLifeTime + ObjectType + payload
               PayloadLenInBytes * TimeToLiveInSeconds
   loadvalue = ---------------------------------------  +  payloadLengthExtraBytes + 8
   target = ------------------------------------------------
            loadvalue * averageProofOfWorkNonceTrialsPerByte

Maximum object size

In version 2 the maximum object size was defined to be 170 MBytes. This object size is totally unrealistic for a normal use (POW), but is perfectly for a network attack. It will be to big to handle for clients with low bandwidth. Currently an average bitmessage "msg" object has the size of 2 kBytes. So version 3 limits the objects to a maximum size of 256 kBytes.